25mm Glass fiber

Description

GVS Life Sciences offers a range of disposable syringe  filter devices designed to provide fast and efficient filtration of aqueous and organic solutions. They are available in a wide variety of sizes and membranes, with a polypropylene or acrylic housing, for both sterile and non sterile laboratory applications.

Features and Benefits:

Lower hold-up volume: Due to an improved  flow channel design and reduced spacing between the supports within the housing, for better handling of small sample volumes or costly samples

Increased operating pressure: Up to 130 psi due to the over-mold that prevents sample leaking at the seam and keeps the  lter unit from bursting in half

Strict quality control: Syringe  lters are integrity tested to ensure a proper  fit and weld to eliminate any potential  filter by-pass

Accurate labeling: Each  filter is labeled with the specific filter material and pore size for easy identification even if the syringe  filter is not in its original packaging

Application

Filtration of Aqueous, Organic and Alcohol Solutions

Analytical Sample Preparation

IC Chromatography

Fuel Hydraulic Fluids and Machined Parts

Clarification

Protein Chemistry

Cell Culture

Specifications

Part No. Diameter Pore Size Inlet/Outlet Color Package Sterilized
FJ25BNPGF007AD01 25mm 0.70μm FLL/MLS Polypropylene(Transparent) 500/pk No

Order

FJ25BNPGF010AD01 25mm 1.0μm FLL/MLS Polypropylene(Transparent) 500/pk No

Order

FJ25BNPGF012AD01 25mm 1.2μm FLL/MLS Polypropylene(Transparent) 500/pk No

Order

FJ25BNPGF031AD01 25mm 3.1μm FLL/MLS Polypropylene(Transparent) 500/pk No

Order

Ordering information

Part no. Product Description Package
10498303 Neutralizing Buffer Swabs Neutralizing buffer swabs are used in the monitoring of surfaces for total bacterial count. Neutralizing buffer inactivates the bactericidal and bacteriostatic effects of chlorine and quaternary ammonium detergents. 4ml, 125/pk
10498304 4ml, 500/pk
10498305 Buffer Swabs Buffer Swabs are used for the collection of surface contamination from flat or convoluted surfaces prior to transport to a laboratory for culture and enumeration. Buffer swabs contain no bacteriostatic or bactericidal compounds and cannot suppress the action of detergents. 4ml, 125/pk
10498306 4ml, 500/pk
10498315 Total Count Swab Kit Total Count Swab Kit is used for the non-selective development and enumeration of all aerobic bacteria on surfaces in accordance with Hazard Analysis and Critical Control Points (HACCP). The kit includes the swabs and culture medium, packaged with a membrane device, providing a quantitative result. 2.8 mL/tube and membrane device, 30/pk
10498316 Yeast and Mold Swab Kit Yeast and Mold Swab Kit is used for the enumeration of yeast and molds on surfaces in accordance with HACCP. The kit includes the swabs and culture medium, packaged with a membrane device, providing a quantitative result. M-Green yeast and mold is an improved modification of the liquid medium, and was developed to improve efficiency of detection and enumeration of fungi in sugar based drinks using the membrane filtration method. This medium has a low pH, which inhibits bacterial growth. 2.8 mL/tube and membrane device, 30/pk
10498402 SwabCheck Escherichia coli SwabCheck Escerichia coli is used for the detection of Escherichia coli on surfaces. The presence of fluorescence using a longwave UV light source confirms the presence of Escherichia coli and any further confirmation is not required. MUG detects anaerogenic strain that may not be detected in the conventional procedure. 4 mL/tube, 125/pk
10498404 SwabCheck SwabCheck is used as an indication of hygiene on contact surfaces. SwabCheck changes color from purple to yellow. The color change is based on acid reaction with the indicator. The more rapid the color change, the higher the level of bacteria in the sample. SwabCheck is useful in determining the sanitation levels of preparation surfaces, filling ports, and processing areas in beverage and food processing plants, dairies, restaurants, and healthcare facilities. 4 mL/tube, 125/pk
10498406 Coliform SwabCheck Escherichia coli and coliforms are used traditionally as indicator organisms for fecal contamination in water and other environmental samples. Detection of these organisms usually points to poor hygiene at some stage in the production process or pollution of water at source. The presence of coliforms is indicated by a color change from brown to yellow. The more rapid the color change the higher the level of coliform bacteria. Individually wrapped package, 25/pk
10498407 Hygiene SwabCheck Easy to use: The Hygiene SwabCheck shows an obvious color change from red to yellow. The time taken for this change is an indication of the level of contamination. This should be used in conjunction with known specification levels of your process/product. Individually wrapped package, 25/pk
10498408 Listeria SwabCheck Listeria Isolation SwabCheck is designed to be used alongside traditional selective methods to improve the quality system and minimize the risk of Listeria contamination. This simple to use diagnostic test can be applied anywhere in the environment and on foodstuffs where the presence of Listeria species would be critical. Individually wrapped package, 25/pk
10498521 Polywipe Sponge Polywipe Sponge is used for the recovery of microorganisms from a surface. Polywipe is a blue sponge that is premoistened with neutralizing buffer to neutralize the effects of surface disinfectants. The sponge material is selected to be free of the preservatives found in commercially available sponges, which can inhibit microorganism growth. Polywipe sponges are biocide free and tested for zero toxicity to microorganisms. Each sponge is individually wrapped in a peel pouch and gamma irradiated to ensure sterility. Individually wrapped pre-moistened sponge, 50/pk

Other Application

Microbiology

Sample Preparation

Cartridge

Capsule Filter

Enviromental

Molecular Biology